3 Ways How to Soften Polymer Clay Perfectly

3 Ways How to Soften Polymer Clay Perfectly
3 Ways How to Soften Polymer Clay Perfectly

Polymer clay receives more durable as it receives older, making it difficult or perhaps not possible to shape and use, particularly if the clay has been left uncovered. Yet many don’t understand that even the hardest clay is salvageable. You may use various tips on how to revitalize the clay, from hand-kneading to adding oils or diluents. Utilizing one or numerous of these methods can transform rock-hard clay into pliable, supple clay that’s ready for shaping!

Method 1 Warming and Kneading the Clay

1 Warm the clay with physique heat.

Warm the clay with physique heat. If your clay is simply somewhat hard, you may be able to soften it simply by warming and kneading it along with your hands. Before you begin kneading the clay, carry the clay in your fingers to hot it. You may additionally warm it using the warmth of your body with the aid of sitting on desirable of it. Warmth facilitates revitalizing the clay. If your clay is just a little bit hard, you may be able to restore its softness simply by utilizing physique heat.
No topic what technique you use to melt clay, necessarily warm it first.

2 Warm the clay using a warm source.

Warm the clay using a warmness source. If the clay is especially hard, you will have to use a warm source to melt the clay. Lay a warm water bottle over your clay for twenty mins to help soften it. You could also use a heat lamp, yet make sure to no longer warm the clay over body temperature. This can trigger the clay to begin to bake, which will make it unusable. Additionally, you can place the clay in the microwave for 10-second spurts until it’s warm.

3 Roll the clay in your hands.

Roll the clay on your hands. Once the clay has softened, roll it among your arms in a snake shape, then roll it into a ball. Rolling the clay creates friction, which helps to soften it. You could also reduce the clay into small pieces, then roll it.

4 Roll with a rolling pin.

Roll with a rolling pin. If the clay remains too hard to roll together with your hands, you’ll need to use more force. Lay the piece of clay on a clear slicing board or the counter, then press down at the clay to flatten it out up to your can. Then roll the clay out with a rolling pin. After you roll it out, it should be warm enough to roll along with your hands.

5 Hit the clay with a mallet.

Hit the clay with a mallet. In case your clay is too hard to roll out with a rolling pin, you will want a large force. Wreck the clay up into as small of portions as you can, then region the clay portions in a sealed plastic bag. Wrap the bag with a cloth and put it on the ground or the cement or pavement outside. Use a rubber mallet to pound at the clay for several minutes. Utilizing the mallet will break up the clay and add friction which will make it softer. After you have used the rubber mallet, take the clay out of the bag and roll it along with your arms into a ball.

6 Knead the clay.

Knead the clay. Once you have rolled the clay, knead the clay along with your fingers on a counter simply as you will with dough. Use as much force as you need to pull aside and reshape the clay. Kneading the clay guarantees which you handle the total floor location of the clay. You can also use a clay-kneading computing device if you don’t want to knead through the hand.

Method 2 Adding Softening Brokers to the Clay

1 Upload in a liquid diluent.

Add in a liquid diluent. A liquid diluent is one product for sale that softens unworkable clay. Many diluents are manufactured using the companies that make polymer clay, and they’re made specifically for rejuvenating old clay.
Use liquid diluents if warming and kneading the clay doesn’t paintings to melt it.
Add in liquid diluents a drop at a time as you knead the clay. Including too much could make the clay mushy.
Liquid diluents can be used as glue, and for this reason, would upload stickiness for your clay. In case your clay is becoming too sticky, wrap it in a paper towel to absorb a number of the stickiness.

2 Use a bar of clay softener.

Use a bar of clay softener. There also are numerous clay softeners that are available in bar form. Instead of being drinks that you add, the bars are made up of a neutral mixing compound that allows your clay to grow to be extra workable.
Use one part of stable clay softener to 5 components of clay. Warm the clay, then upload the bar clay softener and knead till the clay and the clay softener are mixed.
Bar clay softeners are whitish colored and for that reason paintings best with enormously saturated clay. Observe that including too excessive a ratio of bar clay softener can dilute the color of the clay.

3 Add-in liquid clay.

Add in liquid clay. Liquid polymer clay is a further fabric that may be used to make tough clay extra pliable. Use liquid polymer similarly as you would the diluent, including it drop by way of drop and kneading the clay in between drops till the clay has reached the correct consistency.
Try to use uncolored liquid clay so that it doesn’t impact the color of the clay. You can also use tinted liquid clay, yet it’s going to slightly change the unique color.

4 Upload mineral oil.

Add mineral oil. Even though mineral oil isn’t made particularly for helping to melt clay, it does work wonders to soften and improve the texture of polymer clay. Add in a drop of mineral oil at a time, kneading in between each drop until the clay is workable.

5 Rub the clay with petroleum jelly.

Rub the clay with petroleum jelly. Petroleum jelly is a typical family product that you can use in case you don’t have entry to advertisement clay softeners. To use petroleum jelly, dab a small quantity on your palms and rub it into the clay. Then knead the clay to combine in the petroleum jelly. Keep adding extra till you reach the optimal consistency.

6 Combine hard clay with sparkling clay.

Combine tough clay with fresh clay. Another option that you have is to simply tack on fresh clay to the hardened clay, then knead the clays together. The more new clay that you add, the softer the combined clay becomes. Make sure to add clay of the same color except you don’t mind the colors mixing.
Knead the clay along with your arms till the clay feels regular throughout.

Method 3 Chopping the Clay

1 Chop the clay with a knife.

Chop the clay with a knife. When you are working with very hard clay, you may have got to use a foodstuff processor to certainly damage down the clay and warm it up. Before you set the clay pieces into the meals processor, first use a sharp knife or cleaver to cut the clay into the smallest portions which you can.

2 Location the clay and a softening agent in a foodstuff processor.

Place the clay and a softening agent in a nutrients processor. Upon getting chopped the clay as much as you can, take the chopped pieces and place them in a nutrients processor. In case you wish, add a few drops of diluent or liquid polymer clay to the meals processor as good to added assist soften the clay. Then location the lid at the nutrients processor.
You may also use an espresso grinder, but you’ve got to grind in various batches.
A pasta computing device additionally works for this.
Try to get a separate bowl and blade for blending clay because until you clear them particularly appropriately it’s not helpful to use analogous ones for meals and clay.

3 Grind in ten-second spurts.

Grind in ten-second spurts. Use the highest placing in your foodstuff processor to grind the clay. Grinding the clay will separate it into smaller pieces and soften it, making the clay easier to work with. Grind for one to 3 minutes, until the clay is soft.

4 Eliminate the clay and combine the pieces.

Remove the clay and combine the pieces. After the clay is soft, take it out of the meals processor. You will have to use a spoon to scrape the perimeters and get the clay out of the nooks and crannies of the foodstuff processor. When you get each of the clay out, press the pieces together to mix them.

5 Knead the clay in your hands.

Knead the clay in your hands. After you have chopped the clay in the nutrients processor, it ought to be tender and pliable. Knead the clay in your arms to completely blend the pieces. It should now be smooth and ready for use!